Care and Maintenance
Each piece of furniture and object is handmade in the finest quality at a small high-end cabinetmakers workshop locally in Copenhagen’s old Meatpacking District.
We use solid PEFC-certified wood, responsibly sourced Denmark or Germany and carefully hand-picked by our cabinetmaker.
Furniture and objects made of oak are finished with Rubio Monocoat Oil Plus 2C in the colour Pure (contains no pigment), creating a surface with a soft touch. The oil is food safe, water-repellant and resistant to stains.
Furniture and objects made of douglas fir are treated with Osmo 3032 Satin Clear hardwax oil (contains no pigment), creating a surface with a soft touch. The oil is food safe, water-repellant and resistant to stains.
Plinth Soap Dish
General cleaning
The drain allows the soap to dry in between uses.
Wipe clean with a warm damp cloth.
Care and Maintenance
To avoid dryness, occasionally oil the wood with a natural wood oil (e.g. Osmo 3032 Satin Clear), or simply a vegetable oil from the kitchen.
- Wipe clean with a damp cloth.
- Allow to dry for about 15 minutes.
- Apply a small amount of oil onto a dry cloth and rub the oil into the wood in the longitudinal direction of the wood grain. Be careful to distribute the oil evenly over the entire surface.
- Allow the oil to absorb for a few minutes and then wipe away all the excess oil with a cloth. Let dry.
Furniture
General cleaning
Wipe the surface clean with a damp cloth, wrung out in clean water. Always wipe the surface clean and dry of any liquids as soon as possible.
Avoid products containing any type of chemicals.
Care and Maintenance
For tabletops made of oak and douglas fir, we recommend using Rubio Monocoat Surface Care on a weekly to monthly basis, in order to keep the wooden surface in its best possible condition. Surface Care is a convenient, ready-to-use product that cleans, cares and maintains the wooden surface. We recommend not using the product more than once a week.
- Clean the surface.
- Spray Surface Care onto the surface.
- Clean the surface with a cloth.
- Allow to dry for about 15 minutes. Do not use the surface until it’s completely dry.
Maintenance
Oak
For furniture made of oak, we recommend using Rubio Monocoat Universal Maintenance Oil, which is a maintenance oil for refreshing wood treated with Rubio Monocoat oil.
- Clean the surface.
- Spray Surface Care onto the surface.
- Clean the surface with a cloth.
- Allow to dry for about 15 minutes.
- Take the Universal Maintenance Oil and stir thoroughly until a homogeneous mixture is obtained.
- Apply a small amount of oil onto a dry cloth and rub the oil into the wood in the longitudinal direction of the wood grain. Be careful to distribute the oil evenly over the entire surface.
- Allow the oil to absorb for a few minutes and then wipe away all the excess oil with a cloth. Each treated area should be wiped dry within 15 minutes and should not feel sticky anymore. Let dry.
Be aware:
Cloths and paper with oil can ignite spontaneously. Therefore, all used cloths or paper must be soaked in water before disposal.
Douglas fir
For furniture made of douglas fir, we recommend using Osmo 3032 Satin Clear.
- Clean the surface.
- Spray Surface Care onto the surface.
- Clean the surface with a cloth.
- Allow to dry for about 15 minutes.
- Take the Osmo 3032 Satin Clear and stir thoroughly until a homogeneous mixture is obtained.
- Apply a small amount of oil onto a dry cloth and rub the oil into the wood in the longitudinal direction of the wood grain. Be careful to distribute the oil evenly over the entire surface.
- Allow the oil to absorb for a few minutes and then wipe away all the excess oil with a cloth. Each treated area should be wiped dry within 15 minutes and should not feel sticky anymore. Let dry.
Be aware:
Cloths and paper with oil can ignite spontaneously. Therefore, all used cloths or paper must be soaked in water before disposal.
Restoration and Repair
Oak
For furniture made of oak, we recommend using Rubio Monocoat Oil Plus 2C in the original colour, if the surface shows a lot of wear and tear, or needs a colour repair.
- Clean the surface.
- Spray Surface Care onto the surface.
- Clean the surface with a cloth and allow to dry for about 15 minutes.
- Polish the surface with sandpaper 240 grit in the longitudinal direction of the wood grain.
- Wipe the surface with a dry cloth to remove dust.
-
Take the Oil Plus 2C and stir the A-component until a homogeneous mixture is obtained. Mix the two components carefully (1 to 2 minutes) with a ratio of about 3 units A to 1 unit B.
- Apply a small amount of oil onto a dry cloth and rub the oil into the wood in the longitudinal direction of the wood grain. Be careful to distribute the oil evenly over the entire surface.
- Allow the oil to absorb for a few minutes and then wipe away all the excess oil with a cloth. Each treated area should be wiped dry within 30 minutes and should not feel sticky. Let dry.
- Repeat after a few hours to wipe away any excess oil with a cloth. The surface should not feel sticky anymore. Do not use the surface until it’s completely dry.
Be aware:
Cloths and paper with oil can ignite spontaneously. Therefore, all used cloths or paper must be soaked in water before disposal.
Douglas fir
For furniture made of douglas fir, we recommend using Osmo 3032 Satin Clear in the original colour, if the surface shows a lot of wear and tear, or needs a colour repair.
- Clean the surface.
- Spray Surface Care onto the surface.
- Clean the surface with a cloth and allow to dry for about 15 minutes.
- Polish the surface with sandpaper 240 grit in the longitudinal direction of the wood grain.
- Wipe the surface with a dry cloth to remove dust.
- Take the Osmo 3032 Satin Clear and stir thoroughly until a homogeneous mixture is obtained.
- Apply a small amount of oil onto a dry cloth and rub the oil into the wood in the longitudinal direction of the wood grain. Be careful to distribute the oil evenly over the entire surface.
- Allow the oil to absorb for a few minutes and then wipe away all the excess oil with a cloth. Each treated area should be wiped dry within 30 minutes and should not feel sticky. Let dry.
- Repeat after a few hours to wipe away any excess oil with a cloth. The surface should not feel sticky anymore. Do not use the surface until it’s completely dry.
Be aware:
Cloths and paper with oil can ignite spontaneously. Therefore, all used cloths or paper must be soaked in water before disposal.